|
||||||
|
Manage the ‘qmail’ message queue using qmHandle Solution qmHandle, a perl script which gives you greater functionality – allows you to view and manage the ‘qmail’ message queue. It can be install by excuting the following commands cd /usr/bin wget -O – “http://easynews.dl.sourceforge.net/sourceforge/qmhandle/qmhandle-1.2.0.tar.gz” | tar xzf Following commands are useful to manage the queue […] I tried to send e-mail from the system to realize fax transmission. However, I attempted to send to eFax’s e-mail address (domain part efaxsend.com), but in the qmail mail log Deferral: CNAME_lookup_failed_temporarily. _ (# 4.4.3) It is recorded as a differer and can not be sent. As a cause, I can not resolve the destination […] Install and use maybe-recordio script Maybe-recordio is a little script written by John M. Simpson which makes it possible for an SMTP service to selectively enable recordio for certain IPs, so you can see what they are doing without filling up your log files with a lot of extra stuff you don’t need to see […] Install qlogtools This package is a set of tools that are useful in analyzing or producing logs from qmail and other packages. Those tools are mainly useful if you plan to make use of qmailanalog or other mail log analyzer A the end, you ‘ll have following additional commands in /usr/local/bin/ multipipe – Supervise […] cd /downloads/scripts/ wget http://qmail.jms1.net/scripts/mtrack wget http://qmail.jms1.net/scripts/strack chmod 751 mtrack strack cp /downloads/scripts/mtrack /var/qmail/bin/ cp /downloads/scripts/strack /var/qmail/bin/ ln -s /var/qmail/bin/mtrack /usr/bin/ ln -s /var/qmail/bin/strack /usr/bin/ Use it cat /var/log/qmail/qmail-send/current | mtrack cat /var/log/qmail/qmail-smtpd/current | strack cat /var/log/qmail/qmail-smtpdssl/current | strack You should have such result @400000004e46646a134478e4 starting delivery 27: msg 654065 to remote nospam@test.com @400000004e46647f195ff2e4 delivery 27: […] Clear & Clean Qmail Queue Completely, Safely & Fast! This script should not remove anything it should not remove, and it should clear all e-mail from your qmail queue safely so you can start sending mail normally again. (This is for qmail only and not a solution for any other mail programs.) You’re going to […] cd /downloads/ tar zxvfp /downloads/qmqtool-1.14.tgz cd /downloads/qmqtool-1.14/ ./configure –perl=/usr/bin/perl –qmaildir=/var/qmail You should have such result found perl: /usr/bin/perl found qmail directory: /var/qmail qmqtool will be installed in: /usr/local/script documentation will be installed in /usr/local/man if any of these values need changing, try ./configure –help Making sure this package is intact.. src/qmqtool syntax OK …done. […] Installing spamdyke is pretty simple. 1) Have a working qmail installation that runs from tcpserver. If you can’t send and receive email, stop and go to one of the following sites for help: http://www.lifewithqmail.org/ http://www.qmailrocks.org/ http://www.qmailtoaster.org/ If you’re using QmailToaster, there’s no need to install spamdyke by hand. Use the spamdyke installation script in […] #compter les mails dans la liste d’attente /var/qmail/bin/qmail-qstat #qmHandle lister les mails (l : liste, c : couleur) qmHandle -l -c #stop qmail /etc/init.d/qmail stop #pour lister qmail-remove -p @domainesuspect.com #pour lister et remove (l’ordre des paramètres compte) qmail-remove -r -p @domainesuspect.com #start qmail /etc/init.d/qmail stop #forcer traitement de file d’attente qmHandle -a […] We’re a PA partner and have clustered Qmail with 4 servers + NFS storage. We’ve seen an issue where Qmail throws the following error: failure: Sorry,_I_could_not_find_a_mail_exchanger_or_IP_address._(#5.4.4)/ This is a permanent error and means Qmail will not retry, the sender will receive an NDR (Non delivery reply / bounce back). I’ve seen 3 causes so far […] |
||||||
|
Copyright © 2024 - All Rights Reserved Powered by WordPress & Atahualpa |
||||||
Recent Comments