iptables tips and tricks

Tip #1: Take a backup of your iptables configuration before you start working on it.

Back up your configuration with the command:

/sbin/iptables-save > /root/iptables-works

Tip #2: Even better, include a timestamp in the filename.

Add the timestamp with the command:

/sbin/iptables-save > /root/iptables-works-`date +%F`

You get a file with a name like:

/root/iptables-works-2018-09-11

If you do something that prevents your system from working, you can quickly restore it:

/sbin/iptables-restore < /root/iptables-works-2018-09-11

Tip #3: Every time you create a backup copy of the iptables policy, create a link to the file with ‘latest’ in the name.

ln –s /root/iptables-works-`date +%F` /root/iptables-works-latest

Tip #4: Put specific rules at the top of the policy and generic rules at the bottom.

Avoid generic rules like this at the top of the policy rules:

iptables -A INPUT -p tcp --dport 22 -j DROP

The more criteria you specify in the rule, the less chance you will have of locking yourself out. Instead of the very generic rule above, use something like this:

iptables -A INPUT -p tcp --dport 22 –s 10.0.0.0/8 –d 192.168.100.101 -j DROP

This rule appends (-A) to the INPUT chain a rule that will DROP any packets originating from the CIDR block 10.0.0.0/8 on TCP (-p tcp) port 22 (–dport 22) destined for IP address 192.168.100.101 (-d 192.168.100.101).

There are plenty of ways you can be more specific. For example, using -i eth0 will limit the processing to a single NIC in your server. This way, the filtering actions will not apply the rule to eth1.

Tip #5: Whitelist your IP address at the top of your policy rules.

This is a very effective method of not locking yourself out. Everybody else, not so much.

iptables -I INPUT -s <your IP> -j ACCEPT

You need to put this as the first rule for it to work properly. Remember, -I inserts it as the first rule; -A appends it to the end of the list.

Tip #6: Know and understand all the rules in your current policy.

Not making a mistake in the first place is half the battle. If you understand the inner workings behind your iptables policy, it will make your life easier. Draw a flowchart if you must. Also remember: What the policy does and what it is supposed to do can be two different things.

Set up a workstation firewall policy

Scenario: You want to set up a workstation with a restrictive firewall policy.

Tip #1: Set the default policy as DROP.

Tip #2: Allow users the minimum amount of services needed to get their work done.

The iptables rules need to allow the workstation to get an IP address, netmask, and other important information via DHCP (-p udp –dport 67:68 –sport 67:68). For remote management, the rules need to allow inbound SSH (–dport 22), outbound mail (–dport 25), DNS (–dport 53), outbound ping (-p icmp), Network Time Protocol (–dport 123 –sport 123), and outbound HTTP (–dport 80) and HTTPS (–dport 443).

Restrict an IP address range

Scenario: The CEO of your company thinks the employees are spending too much time on Facebook and not getting any work done. The CEO tells the CIO to do something about the employees wasting time on Facebook. The CIO tells the CISO to do something about employees wasting time on Facebook. Eventually, you are told the employees are wasting too much time on Facebook, and you have to do something about it. You decide to block all access to Facebook. First, find out Facebook’s IP address by using the host and whois commands.

Then convert that range to CIDR notation by using the CIDR to IPv4 Conversion page. You get 31.13.64.0/18. To prevent outgoing access to www.facebook.com, enter:

iptables -A OUTPUT -p tcp -i eth0 –o eth1 –d 31.13.64.0/18 -j DROP

Regulate by time

Scenario: The backlash from the company’s employees over denying access to Facebook access causes the CEO to relent a little (that and his administrative assistant’s reminding him that she keeps HIS Facebook page up-to-date). The CEO decides to allow access to Facebook.com only at lunchtime (12PM to 1PM). Assuming the default policy is DROP, use iptables’ time features to open up access.

This command sets the policy to allow (-j ACCEPT) http and https (-m multiport –dport http,https) between noon (–timestart 12:00) and 13PM (–timestop 13:00) to Facebook.com (–d 31.13.64.0/18).

Regulate by time—Take 2

Scenario: During planned downtime for system maintenance, you need to deny all TCP and UDP traffic between the hours of 2AM and 3AM so maintenance tasks won’t be disrupted by incoming traffic. This will take two iptables rules:

With these rules, TCP and UDP traffic (-p tcp and -p udp ) are denied (-j DROP) between the hours of 2AM (–timestart 02:00) and 3AM (–timestop 03:00) on input (-A INPUT).

Limit connections with iptables

Scenario: Your internet-connected web servers are under attack by bad actors from around the world attempting to DoS (Denial of Service) them. To mitigate these attacks, you restrict the number of connections a single IP address can have to your web server:

iptables –A INPUT –p tcp –syn -m multiport -–dport http,https –m connlimit -–connlimit-above 20 –j REJECT -–reject-with-tcp-reset

Let’s look at what this rule does. If a host makes more than 20 (-–connlimit-above 20) new connections (–p tcp –syn) in a minute to the web servers (-–dport http,https), reject the new connection (–j REJECT) and tell the connecting host you are rejecting the connection (-–reject-with-tcp-reset).

Monitor iptables rules

Scenario: Since iptables operates on a “first match wins” basis as packets traverse the rules in a chain, frequently matched rules should be near the top of the policy and less frequently matched rules should be near the bottom. How do you know which rules are traversed the most or the least so they can be ordered nearer the top or the bottom?

Tip #1: See how many times each rule has been hit.

Use this command:

iptables -L -v -n –line-numbers

The command will list all the rules in the chain (-L). Since no chain was specified, all the chains will be listed with verbose output (-v) showing packet and byte counters in numeric format (-n) with line numbers at the beginning of each rule corresponding to that rule’s position in the chain.

Using the packet and bytes counts, you can order the most frequently traversed rules to the top and the least frequently traversed rules towards the bottom.

Tip #2: Remove unnecessary rules.

Which rules aren’t getting any matches at all? These would be good candidates for removal from the policy. You can find that out with this command:

iptables -nvL | grep -v "0     0"

Note: that’s not a tab between the zeros; there are five spaces between the zeros.

Tip #3: Monitor what’s going on.

You would like to monitor what’s going on with iptables in real time, like with top. Use this command to monitor the activity of iptables activity dynamically and show only the rules that are actively being traversed:

watch --interval=5 'iptables -nvL | grep -v "0     0"'

watch runs ‘iptables -nvL | grep -v “0     0″‘ every five seconds and displays the first screen of its output. This allows you to watch the packet and byte counts change over time.

Report on iptables

Scenario: Your manager thinks this iptables firewall stuff is just great, but a daily activity report would be even better. Sometimes it’s more important to write a report than to do the work.

Use the packet filter/firewall/IDS log analyzer FWLogwatch to create reports based on the iptables firewall logs. FWLogwatch supports many log formats and offers many analysis options. It generates daily and monthly summaries of the log files, allowing the security administrator to free up substantial time, maintain better control over network security, and reduce unnoticed attacks.